Led Status Board; Ir/Sound Board - NEC VERSA FX Service And Reference Manual

LED Status Board

Use the following steps to remove the LED status board.
1. Remove the keyboard, front cover assembly, top cover assembly, and PC card assembly
from the system.
Disconnect the LED status board cable from connector P23 on the main board.
2.
Locate and remove the screw that secures the board to the system.
3.
A – Screw
B – LED Status Board
4. Lift the LED status board out of the system.

IR/Sound Board

Use the following procedure to remove the IR/sound board.
1. Remove the keyboard, front cover assembly, top cover assembly, and PC card assembly
from the system.
3-12 Disassembly and Reassembly
Locating/Removing the LED status board screw
C – LED Status Board Cable Connector