Using The Main Battery Pack; Determining Battery Status - NEC VERSA FX Service And Reference Manual

Hide thumbs Also See for VERSA FX:

Table of Contents

Using the Main Battery Pack

The NEC Versa comes with a rechargeable Lithium-Ion (Li-Ion) battery pack that's easy to

install and remove.

A – Battery Connectors

following:

! Keep the battery away from extreme heat.

! Keep metal objects away from the battery connectors to prevent a short circuit.

! Make sure the battery is properly installed in the battery bay.

! Read the precautions printed on the battery.

Your NEC Versa system provides tools to help you keep track of the main (and an optional)

battery's power level. If your system is configured (default setting) to display the power icon on

the taskbar, an electrical plug displays when the system is connected to an AC power source or a

battery icon displays when the system is not connected to an AC power source.

Use the system's power meter to determine battery status. Access the system's power meter in

the following ways:

Move the cursor over the power icon on the taskbar to display the remaining battery

power for the system's main battery.

Right click the power icon on the taskbar to open the power meter or to adjust power

properties.

Double click the power icon on the taskbar to display the remaining power for both the

main and optional (if attached) battery.

Go to Start, Settings, Control Panel, and double click the Power Management icon and

select the Power Meter tab.

2-4 System Configuration and Setup

Lithium-Ion battery

B – Alignment Grooves

To prevent accidental battery ignition or explosion, adhere to the

Table of Contents