Locate and remove the four screws securing the top cover assembly.
7.
8.
Remove the Internet key cable from connector P22 on the main board.
9.
Lift the top cover assembly up and slightly to the right from the system.
Hard Disk Drive
Use the following steps to remove the internal hard disk drive.
1.
Remove the keyboard and front cover assembly from the system.
The hard disk drive is located in the right-side bay under the front cover. No screws secure
2.
the drive. Remove the drive as follows.
!
Disconnect the hard disk drive cable from connector P16 on the main board.
!
Slightly lift the drive out of the bay.
3-10 Disassembly and Reassembly
Locating/Removing the four screws
A – Screw