!
Carefully remove the drive cable connector from the hard disk drive.
A – Hard Disk Drive
PC Card Assembly
Use the following procedure to remove the PC card assembly.
Remove the keyboard, front cover assembly, and top cover assembly from the system.
1.
2.
The PC card assembly is located in the left-side bay under the front cover. Remove the PC
card assembly as follows:
!
Remove the four screws securing the assembly to the system.
!
Pull up the assembly to disconnect it from the I/O board.
!
Lift the assembly out of the system.
Removing the hard disk drive
B – Hard Disk Drive Cable Connector
Removing the PC card assembly
A – Screw
Disassembly and Reassembly 3-11