Keyboard - NEC VERSA FX Service And Reference Manual

Keyboard

Use the following steps to remove the keyboard assembly.
1. Make sure that the system is powered off and that no peripheral devices are attached.
2. Locate the three keyboard locking tabs: one on the upper left of the keyboard, one above the
F8 key, and the other on the upper right of the keyboard.
3. Using a small flat-head screwdriver, release the locking tabs by pushing them toward the
back of the system.
With the tabs released, carefully lift the keyboard assembly out of the system. Disconnect
4.
the keyboard cable from connector P8 on the main board.
3-6 Disassembly and Reassembly
Locating the keyboard locking tabs
A – Locking Tab