Table of Contents
Advertisement
Peripheral Setup
The Peripheral Setup menu displays the connection locations between the system and
the Input/Output (I/O) ports and lets you specify different port assignments as needed.
Parameter
USB Controller
Internal Hard Drive
Serial Port
Parallel Port
Parallel Mode
IR Serial Port
Note
using the Windows device manager. The device will not be listed in the Windows device
list. To control the device using the Windows device manager, select any setting other
than Disabled in Peripheral Setup.
Peripheral Setup allows you to define the following functions.
USB Controller — Enables or disables the USB controller.
!
Internal Hard Drive — Selects which IDE controller is enabled.
!
Serial Port — Disables the port or changes its IRQ and COM port assignment.
!
Parallel Port/Parallel Mode — Disables or reassigns the parallel port and selects a
!
parallel port mode.
IR Serial Port — Enables, disables or reassigns the IR serial port.
!
Default Setting
Disabled
Both
Auto
Auto
Bi-Dir
Disabled
If you disable a device in Peripheral Setup, you cannot enable or assign it
Peripheral Setup
Using the BIOS Setup Utility 3-17
Alternate Setting(s)
Enabled
Enabled/Disabled
Primary/Secondary
Disabled
COM1,IRQ4/COM2,IRQ3
COM3,IRQ4/COM4,IRQ3
Disabled/LPT1/LPT2
Uni-Directional/ECP/EPP
Auto
COM2,IRQ3/COM3,IRQ4/
COM4,IRQ3
Advertisement
Table of Contents
