Insert the new battery into the socket with the side labeled "+" facing up, and snap the
6
battery into place.
Close the computer cover.
7
NOTICE:
the computer.
Connect your computer and devices to electrical outlets, and turn them on.
8
Enter system setup (see page 109) and restore the settings you recorded in step 1.
9
Properly dispose of the old battery (see page 11).
10
Closing the Computer Cover
Ensure that all cables are connected, and fold cables out of the way.
1
Ensure that no tools or extra parts are left inside the computer.
2
Close the computer cover:
3
Pivot the cover down and into position.
a
Press down on the cover to close it.
b
Once the cover is closed, slide the cover latch release to the right until the latch clicks
c
into place.
102
Removing and Installing Parts
battery socket
(BATTERY)
To connect a network cable, first plug the cable into the network wall jack and then plug it into
battery