top anchor tabs (2)
side anchor tabs (2)
bottom anchor tabs (2)
Installing the Processor Airflow Shroud
Follow the instructions in "Before You Begin" on page 68.
1
Open the computer cover (see page 70).
2
Insert the bottom anchor tabs into the anchor slots.
3
Align and insert the side anchor tabs into the anchor slots.
4
Press the indentations until the top anchor tabs on the shroud snap securely into place.
5
Close the computer cover (see page 102).
6
NOTICE:
the computer.
Connect your computer and devices to electrical outlets, and turn them on.
7
92
Removing and Installing Parts
To connect a network cable, first plug the cable into the network wall jack and then plug it into
airflow shroud
indentations (2)