Table of Contents
Advertisement
Align the notch on the bottom of the module with the crossbar in the connector.
6
NOTICE:
Insert the module straight down into the connector, ensuring that it fits into the vertical
7
guides at each end of the connector. Press firmly on the ends of the module until it snaps into
place.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the
module.
Close the computer cover (see page 102).
8
NOTICE:
the computer.
Connect your computer and devices to electrical outlets, and then turn them on.
9
Click the Start button, right-click My Computer, and then click Properties.
10
Click the General tab.
11
To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
12
76
Removing and Installing Parts
memory module
cutouts (2)
To avoid breaking the memory module, do not press near the middle of the module.
To connect a network cable, first plug the cable into the network wall jack and then plug it into
notch
crossbar
Advertisement
Table of Contents
