HP 108164-003 - ProLiant - 800 Reference Manual page 75

•
cpqSsBoxModel
•
cpqSsBoxSerialNumber
•
cpqSsBoxTempStatus
•
cpqSsBoxLocationString
Supporting SNMP Trap Description: "Storage System temperature status changed to
[cpqSsBoxTempStatus]."
NT Event ID: 1220 (Hex)0x843504c4 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Fault Tolerant Power Supply Status Change.
Log Message: The fault tolerant power supply in the %6 %7 storage system connected to %5 of the
controller in%4 has a new status of %2.
SNMP Trap: cpqSs6PwrSupplyStatusChange - 8031 in CPQSTSYS.MIB
Symptom: Storage System Fault Tolerant Power Supply Status Change. The agent has detected a
change in the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupplyStatus
indicates the current power supply status.
User Action: If the power supply status is degraded, restore power or replace the failed power supply.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqSsBoxCntlrHwLocation
•
cpqSsBoxCntlrIndex
•
cpqSsBoxBusIndex
•
cpqSsBoxVendor
•
cpqSsBoxModel
•
cpqSsBoxSerialNumber
•
cpqSsBoxFltTolPwrSupplyStatus
•
cpqSsBoxLocationString
Supporting SNMP Trap Description: "Storage System power supply status changed to
[cpqSsBoxFltTolPwrSupplyStatus]."
NT Event ID: 1221 (Hex)0x843504c5 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SAS/SATA Physical Drive Status Change.
Log Message: The physical drive in %4, %5 with serial number "%6", has a new status of %7.
SNMP Trap: cpqSasPhyDrvStatusChange - 5022 in CPQSCSI.MIB
Symptom: Physical Drive Status Change. The Storage Agent has detected a change in the status of a
SAS or SATA physical drive. The current physical drive status is indicated in the cpqSasPhyDrvStatus
variable.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
Storage agents 75