Dell OptiPlex N Troubleshooting Manual page 28

Diagnostics and troubleshooting guide (.pdf)
Hide thumbs Also See for OptiPlex N:
Table of Contents

Advertisement

Message
Incompatible
Processors:
Cache sizes
different!
Invalid
configuration
information -
please run
SETUP program
Keyboard clock
line failure
Keyboard
controller
failure
Keyboard data
line failure
Keyboard
failure
Keyboard stuck
key failure
Memory address
line failure at
address , read
value
expecting value
Memory
allocation
error
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and acronym list that precedes the
Index.
2-4
Diagnostics and Troubleshooting Guide
Table 2-1. System Messages (continued)
Cause
This message appears for a dual-
processor system if both processors
do not have the same-size level-2
cache.
The system configuration informa-
tion does not match the hardware
configuration.
A cable or connector may be loose,
or the keyboard or keyboard/mouse
controller may be faulty.
One or more SIMMs may be faulty
or improperly seated.
The software you are attempting to
run is conflicting with the operating
system or another application pro-
gram or utility.
Action
Replace one of the microprocessors to make the
level-2 cache sizes match. If you need technical
assistance, see Chapter 7, "Getting Help."
NOTE: This message indicates a fatal error. When
a fatal error occurs, the system usually cannot be
rebooted until an appropriate hardware change
has been made.
Enter the System Setup program and correct the
system configuration information. See your system
documentation for instructions.
See "Troubleshooting the Keyboard" in Chapter 5.
See "Troubleshooting System Memory" in
Chapter 6.
Turn off the computer, wait 30 seconds, and then
turn it on. Try to run the program again. If the
problem persists, contact the software company.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents