Table of Contents
Advertisement
Required items
The items shown in illustration 54 are used when the DM-D500 is
used with other TM printers. These items are packed with the
"DM-D pole unit for TM printers (Type A)" (DP-502).
54
fixing plate A
fixing screws for
wood position
Assembling using Velcro tapes
1. Attach Velcro tapes to the bottom of
fixing plate A as shown in
illustration 55.
2. Pass the cable for the DM-D500 through support C, and attach
support C to the DM-D500 as shown in illustration 56. When
using support B for extension, insert the tab on support B into
the hole on support C as shown in illustration 57 until you feel
it click.
Velcro tapes
support C
56
Velcro tapes
support B
(for extension)
55
57
when using support B
for extension
DM-D500 Installation Guide 19
English
Advertisement
Table of Contents
