Table of Contents
Advertisement
The jumpers are located as shown in illustration 67.
Precautions on using the power supply unit
To avoid damage to the DM-D500 and the power supply unit, note
the following points.
Use the optional Seiko Epson products, PS-170, PA-6508,
PA-6511, PA-6513, PB-6509, or PB-6510, as the power supply.
Never connect the DC cable to the power supply unit when the
power supply unit is connected.
Unplug the DC cable by holding the connector part. If you pull
the cable to unplug it, it may be damaged.
Assembling
1. Pass the cable for the DM-D500 through the DM-D stand as
shown in illustration 68. When raising the height of the DM-D
stand, attach the extension support (DP-105) to the DM-D stand
as shown in illustration 69.
67
68
69
DM-D500 Installation Guide 23
English
when using the
extension support
(DP-105)
Advertisement
Table of Contents
