Show [--Index <[-]Number>]; Show [--Count <Number>] - Dell DR4000 Reference Manual

3 2011-12-19 18:19:09
--show [--index <[-]number>]
To display the current list of system alerts by index value (in this example, the
index selected is 1), enter the following command string at the system
prompt:
administrator@mydr4000 > alerts --show --index 1
Index Severity Time
1 INFO
--show [--count <number>]
To display the current count of system alerts by number (in this example, it is
2), enter the following command string at the system prompt:
administrator@mydr4000 > alerts --show --count 2
Index Time
1 2011-08-31 16:46:36
2 2011-08-31 16:46:36
10
Managing the DR4000 System
2011-07-11 16:12:33 Appliance System
Alert Message
Power Supply 0 detected a
failure. Replace the failed
power supply.
Network Interface Controller
PCI slot 3, NIC index 2
disconnected. Reconnect it to
a network and/or check network
switches or routers for
connectivity issues. PCI slot
zero represents embedded NIC,
external otherwise.
Network Interface Controller
PCI Slot 1 Port 1
disconnected. Reconnect it
to a network and/or check
your network switches or
routers for network
connectivity issues.
Event Message
Health Monitor Service
has been installed.