Show; Restart - Dell DR4000 Reference Manual

--show

To display the current networking configuration for a DR4000 system, enter
the example command string at the system prompt:
administrator@mydr4000 > network --show
Device
Boot protocol
IP Addr
Netmask
Gateway
MAC Addr
MTU
Bonding options
Slave Interfaces
eth0 MAC
eth0 Max Speed
eth0 Speed
eth0 Duplex
eth1 MAC
eth1 Max Speed
eth1 Speed
eth1 Duplex
eth2 MAC
eth2 Max Speed
eth2 Speed
eth2 Duplex
eth3 MAC
eth3 Max Speed
eth3 Speed
eth3 Duplex
DNS Suffix
Primary Nameserver
Secondary Nameserver

--restart

To restart the current networking configuration for a DR4000 system, enter
the example command string at the system prompt:
administrator@mydr4000 > network --restart
Shutting down interface bond0:
: bond0
: dhcp
: 10.20.24.55
: 255.255.252.0
: 10.20.32.13
: 78:2B:CB:47:D0:08
: 1500
: "mode=balance-alb miimon=100
xmit_hash_policy=2"
: eth0,eth1,eth2,eth3
: 78:2B:CB:47:D0:08
: 1000baseT/Full
: 1000Mb/s
: Full
: 78:2B:CB:47:D0:09
: 1000baseT/Full
: Unknown
: Unknown
: 00:1B:21:C5:92:B8
: 10000baseT/Full
: Unknown
: Unknown
: 00:1B:21:C5:92:B9
: 10000baseT/Full
: Unknown
: Unknown
: storage.local
: 10.25.19.15
: 10.25.19.16
[
Managing the DR4000 System
OK ]
25