Table of Contents
Advertisement
Feature
Where the utility
can be used
ORCA supports only basic configuration tasks, whereas CPQONLIN and ACU provide full-range support
for standard configuration tasks (on page 6). ACU also provides support for advanced configuration tasks
(on page 6). Some of these advanced tasks are not available in both ACU interface formats (GUI and
CLI).
Support for standard configuration tasks
A "+" indicates the feature or task is supported. A "–" indicates the feature or task is not supported.
Task
Create or delete arrays and logical drives
Assign a RAID level to a logical drive
Identify devices by causing their LEDs to illuminate
Configure SSP
Assign a spare drive to an array
Share a spare drive among several arrays
Assign multiple spare drives to an array
Specify the size of the logical drive
Create multiple logical drives per array
Set the stripe size
Migrate the RAID level or stripe size
Expand an array
Set the expand priority, migrate priority, and accelerator
ratio
Extend a logical drive
Set the boot controller
*This task is supported only on the MSA1000 and MSA1500.
Support for advanced configuration tasks
The following table uses these symbols:
+ —The ACU format supports this task.
– —The ACU format does not support this task.
+/– —Support for this task varies by controller. To support this task, some controllers must have SAAP
activated by a registered license key.
To identify controller-specific feature support and SAAP requirements, see the controller user guide or the
HP website (http://www.hp.com/products/smartarray).
For more information about SAAP, see "Smart Array Advanced Pack
ACU
Any machine that uses a
supported browser
CPQONLIN
Only on the local server
ACU
CPQONLIN
+
+
+
+
+
+
+
+*
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
–
–
–
("About
Overview of array configuration tools 6
ORCA
Only on the local server
ORCA
+
+
–
–
+
–
–
–
–
–
–
–
–
–
+
SAAP" on page 8)."
Hide quick links:
Advertisement
Table of Contents
