Image Command; Cf_Image Command; Cf_ Bright Command; Cf_Cont Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
8.4

Image Command

8.4.1

CF_IMAGE Command

Command "CF_IMAGE__%1" [CR]
"PRESEN" ------------------- Select Presentation
"BRIGHT" -------------------- Select Bright
"MOVIE ----------------------- Select Movie
"SRGB" ----------------------- Select sRGB
%1
"BLACKBOARD" ----------- Select Blackboard
"CLASSROOM" ------------ Select Classroom
"USER1" --------------------- Select USER1
"USER2" --------------------- Select USER2
Select Image mode.
Details (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
8.4.2

CF_ BRIGHT Command

Command "CF_BRIGHT_%1" [CR]
"000~100" -------------- Directly specify setting value of Brightness
%1 "UP" ---------------------- Increment setting value of Brightness by 1
"DN" ---------------------- Decrement setting value of Brightness by 1
Set value of Brightness.
Details (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
8.4.3

CF_CONT Command

Command "CF_CONT_%1" [CR]
"000~100"------------- Directly specify setting value of Contrast
%1 "UP"--------------------- Increment setting value of Contrast by 1
"DN"--------------------- Decrement setting value of Contrast by 1
Set value of Contrast.
Details (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
8.4.4

CF_SHARP Command

Command "CF_SHARP_%1" [CR]
"000~031" -------------- Directly specify setting value of Sharpness.
%1 "UP"--------------------- Increment setting value of Sharpness by 1
"DN"--------------------- Decrement setting value of Sharpness by 1
Set value of Sharpness.
Details (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
15 / 42