PDG-DSU30 Expand Serial Command Functional Specifications
8.4.5
CF_COLOR Command
Command
"CF_COLOR_%1" [CR]
"000~100"------------- Directly specify setting value of Color
%1
"UP"--------------------- Increment setting value of Color by 1
"DN"--------------------- Decrement setting value of Color by 1
Set value of Color. (Available only in the normal Power ON status)
Details
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
8.4.6
CF_TINT Command
Command
"CF_TINT_%1"[CR]
"000~100"------ Directly specify setting value of Tint.
%1
"UP"-------------- Set Tint to UP
"DN"-------------- Set Tint to DN
Set user controlled value of Tint.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
8.4.7
CF_GAMMA Command
Command
"CF_GAMMA_%1" [CR]
"FILM" ------------------------ Select Film
"VIDEO"---------------------- SelectVideo
%1
"GRAPHICS"--------------- Select Graphics
"PC"---------------------------- Select PC
Set user controlled value of Gamma.
Details
No display is shown when projector received command
Acceptable
Correspondence
Unacceptable
8.4.8
CF_BCOLOR Command
Command
"CF_BCOLOR_%1"[CR]
"ON~OFF"------ Directly specify setting value of Brilliant Color.
%1
"UP"---- Change the Brilliant Color upward
"DN"---- Change the Brilliant Color downward
Set user controlled value of Brilliant Color.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
(Available only in the normal Power ON status)
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
16 / 42