PDG-DSU30 Expand Serial Command Functional Specifications
9.8 Lamp Status Read Commands
9.8.1
CR_LAMPMODE Command
Command
"CR_LAMPMODE" [CR]
Details
Get setting status of Eco mode
Acceptable
Correspondence
Unacceptable
9.8.2
CR_PROJH Command
Command
"CR_PROJH" [CR]
Details
Get total running time of projector (in hours)
Acceptable
Correspondence
Unacceptable
9.8.3
CR_LAMPH Command
Command
"CR_LAMPH" [CR]
Get total running time of lamp by hour (h)
Details
*Actual running time, not corresponding value
Acceptable
Correspondence
Unacceptable
"000_%1" [CR]
"ON" ------------ Eco mode is On.
%1
"OFF" ---------- Eco mode is Off.
"Error Code" [CR]
"000_%1" [CR]
%1
"0000000" – "0099999"
"Error Code" [CR]
"000_%1"[CR]
%1 = lamp No.1
"00000"~"99999"
%1, %2
eg; "0410" [CR]
▪▪▪▪ → Lamp No.1 = 410 Hours
"Error Code" [CR]
37 / 42