Security Lock Provisions; Installing A Security Lock; Hp/Kensington Microsaver Security Cable Lock - HP SignagePlayer mp8000r Maintenance And Service Manual

CAUTION:
wrong screw in an application may damage the unit.
8.
If the PC is mounted in the accessory mounting stand, remove it from the stand.

Security Lock Provisions

NOTE: For information on data security features, refer to the Desktop Management Guide and the
HP ProtectTools Security Manager Guide (some models) at http://www.hp.com.
The security locks displayed below and on the following pages can be used to secure the computer.

Installing a Security Lock

HP/Kensington MicroSaver Security Cable Lock

There are two cable lock slots on the rear of the computer. The slot next to the thumbscrew should be
used when there is no port cover. The slot on the far right should be used when a port cover is installed.
Figure 7-1
The screws used in the computer are of different thread sizes and lengths; using the
Installing a Cable Lock with No Port Cover
Security Lock Provisions
93