Card Reader - HP SignagePlayer mp8000r Maintenance And Service Manual
Maintenance & service guide: hp signageplayer mp8000r and mp8000s
Hide thumbs
Also See for SignagePlayer mp8000r:
- Illustrated parts and service map (4 pages) ,
- Getting started manual (36 pages)
Table of Contents
Advertisement
Card Reader
The card reader is secured to the front right corner of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Disconnect the cable from the black system board connector labeled MEDIA.
5.
On the outside of the chassis, remove the one torx T15 screw that secures the card reader to the
chassis.
Figure 7-30
6.
Pull the reader away from the front of the chassis while threading the cable through the slot in the
front of the chassis.
To install the card reader, reverse the removal procedure.
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
Removing the card reader
100).
92).
99).
Card Reader
117
Advertisement
Table of Contents
