Moving A Peer-To-Peer Printer; Removing Peer-To-Peer Software - NEC 4650NX - SuperScript Color Laser Printer Network Manual

13. Click on the Spool Settings button to open the following
dialog box:
14. Select the Disable bi-directional support for this printer
radio button.
15. Click OK.
16. Under the General tab, click on the Print Test Page
button to make sure that the driver is installed correctly.
24 SuperScript Color Laser Network Guide

Moving a Peer-to-Peer Printer

If you move your printer to a new network, you must restore
the NIC to its factory defaults (see page 10). If you have
changed your printer's name, it will revert to its original
factory name.

Removing Peer-to-Peer Software

You should delete all printers which have been installed to
use peer-to-peer printing before you delete the peer-to-peer
software. Follow these steps.
1. Open the Printers window from within Settings... in the
Start menu.
2. In the Printers window, delete all of the printers you
have created which are Peer-to-Peer printers (or switch
each port to LPT1: using the Properties tab).
Removing P2P-IP
To remove the IP peer-to-peer software from your computer,
use the Add/Remove Programs in the control panel.
1. Press the Windows Start button, select Settings, then
select Control Panel.
2. Open Add/Remove Programs. Select P2P-IP in the list
and click Remove.
Removing Peer-to-Peer-IPX
To remove the IPX peer-to-peer software from your
computer, use the PeerToPeer-IPX Uninstall program. Follow
these steps for all SuperScript color laser printer models
except 4650 Series.
1. Insert the SuperScript CD into the drive.
2. Press the Windows Start button and select Run.
3. At Run, type:
<drive>:\P2PIPX\UNINSTAL.EXE
Then click OK.
Follow the Uninstall wizard prompts. When removal is
complete, click OK.
Follow these steps for SuperScript 4650 Series printers.
1. Run the Windows Add/Remove Programs from the
Windows control panel.
2. Select IPX-P2P to remove.