NEC 870 - SuperScript B/W Laser Printer Network User's Manual page 19

Second, Add the Peer to Peer Printer in
Windows
1. In Windows 95/98 or Windows NT 4.0, press the Start
button, select Settings, then select Printers.
2. In the Printers window, double-click Add Printer. This
launches the Add Printer wizard which prompts you
to make selections.
note:
SuperScript 870 printer drivers are provided on
the Solutions CD that comes with the 870 printer.
When the Add Printer wizard asks how the printer is
attached, select Local printer.
Specify NEC as the Manufacturer and NEC
SuperScript 870 as the Printer.
3. Your peer to peer network printer will be listed under
local printer ports and identified using the NIC serial
number. For example, NEC_911499.
Select your new peer to peer printer.
4. Continue responding to the Add Printer wizard until
the process is complete.
Moving a Peer to Peer Printer
If you move your printer to a new network, you must
restore the NIC to its factory defaults (see page 7). If you
have changed your printer's name, it will revert to its
original factory name.
Removing Peer to Peer Software
You should delete all printers which have been installed to
use peer to peer printing before you delete the peer to peer
software. Follow these steps.
1. Press the Windows Start button, select Settings, then
select Printers.
2. In the Printers window, select a printer to delete.
3. Select Delete from the File menu.
Removing P2P-IP
To remove the IP peer to peer software from your
computer, use the Add/Remove Programs control panel.
1. Press the Windows Start button, select Settings, then
select Control Panel.
2. Open Add/Remove Programs. Select P2P-IP in the list
and click Remove.
Removing PeerToPeer-IPX
To remove the IPX peer to peer software from your
computer, use the PeerToPeer-IPX Uninstall program.
Follow these steps.
1. Insert the 870 Network Options CD into the drive.
2. Press the Windows Start button and select Run.
3. At Run, type:
<drive>:\IPX-P2P\UNINSTAL.EXE
Then click OK.
Follow the Uninstall wizard prompts. When removal
is complete, click OK.
17