NEC 870 - SuperScript B/W Laser Printer Network User's Manual page 42

Installing and Printing on Solaris 2.x
1. Run the Installation script by typing: nicinst. Once
the operating system has been identified, the script
downloads the files for your particular system, to the
/usr/nic directory, and prompts you for information
as needed.
2. Type
cp /usr/spool/lp/model/standard
/usr/nic/port1_interface
note:
Use of this default interface in most cases will
suffice for generic or routine printing of most PCL and
ASCII files. To use a printer specific interface other than
the default interface script (named standard), you must
have a copy of that printer interface edited and installed
in the /usr/nic directory.
Next, you will need to edit the printer interface program
you created.
3. Type
cd /usr/nic and using an editor, open and edit the
port1_interface file.
40 SuperScript 870 — Network User's Guide
4. Search for FILTER= and insert the following line above
or below the # FILTER="${LPCAT} section of the file.
Comment (using the # sign) any other FILTER entries
present in this section of the file.
FILTER="/usr/nic/infilter| /usr/nic/
nicfilter <printer NIC name> 10001"
The <printer NIC name> must be the same as the
one present in the /etc/hosts file. Optional
arguments to be inserted after the 10001 entry and
before the trailing <">are
${banner}
${user_name}
${request_ID}
${files}.
For further explanation of these and the statement
above, refer to the System 5 Release 4 System
Administration Manual.
5. Save the file and close the editor.
You need to configure the host-side printer using
lpadmin.