NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 93

8. Replace the Side cover using the two screws
provided to secure it in place.
• If you ever need to remove the SIMM, press
down on the metal tabs on the sides of the
socket.
• Use only 1MB, 4MB, or 16 MB industry
standard 72-pin full page mode SIMMs with
an access time of at least 80 NS.
• If the printer is directly connected to your
computer, the printer driver will see the
additional RAM automatically. Information
will show up on the Accessories tab of the
Windows printer status monitor (after clicking
on Printer Setup).
• If the printer is not directly connected, use the
Printer Setup on the Accessories tab to tell the
driver about the additional memory.
Chapter 7: Printer Options
93