Turning On The Printer - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 1: Setting Up the Printer
Load paper
below this line.
Always re-adjust the paper guides when adding a
new stack of paper.
Do not overload the Multi-purpose tray!
For information on loading various media refer to
Chapter 6, "Using the Printer."
5. Replace the cover on to the Multi-purpose
tray.
20

Turning ON the Printer

1. Plug the power cord into the cord socket
located on the rear panel of the printer.
2. Connect the power cord to a wall outlet or
UL ® inspected power strip (surge protector)
and press the power switch ON [I].
Warning: This printer is intended to be
electrically grounded. The NEC Super-
Script 870 comes with a three-wire
grounding plug—a plug that has a third
(grounding) pin. This plug will fit only a
grounded AC outlet. This is a safety
feature. If you are unable to insert the plug
into the outlet, contact a licensed
electrician to replace the outlet with a
properly grounded outlet. Do not defeat
the purpose of the grounding plug!