Redialing; Automatic Redialing; Manual Redialing - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

04008000001

Redialing

Automatic Redialing

04003010007
If the line is busy or there is no answer, your machine will redial the
04003020013 number up to 5 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
A file number is shown at the upper right corner of the display if it
is a memory transmission file.

Manual Redialing

04003050009
You can also redial the last dialed number manually by pressing REDIAL key.
04003020014
To redial the last dialed number through memory
04003050008
1
04003990006
2
04003060070
04003060048
3
To redial the last dialed number through ADF
04003060049
1
04003990007
04003060058
#@multitude
2
04003060072
#@multitude
3
04003060069
Note:
04003070027
04003070028
Sending Documents via Telephone Line
Set document(s) face down.
Make sure that the MEMORY lamp is on.
PAUSE
REDIAL
START
The document is stored into memory with a file number.
Then dials the last dialed number.
Set document(s) face down.
MEMORY
Make sure that the lamp goes off.
PAUSE
REDIAL
Your machine starts to dial the last dialed number.
1. While the unit is displaying "WAIT TO DIAL", you can press
2. While the unit is displaying "DIALING" and a message is heard through the monitor that the circuits are
busy....., you can press REDIAL
REDIAL
to start redialing immediately.
WAIT TO DIAL NO.001
(Telephone number)
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=01 01%
* DIALING * NO.002
5551234
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
00%
TEL. NO.
5551234
* DIALING *
5551234
to start redialing immediately.
4
93