User Parameters; Setting The Date And Time - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

User Parameters

02009000002
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents
you send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID
Number help to identify you when you send or receive documents.
If a power failure occurs, a built-in battery will back up this information for up to 10 days when it is fully charged.

Setting the Date and Time

02009030001
At standby the display will show the date and time. Once the standby display is set, it will automatically be
02009020001
updated.
1
02009050001
02007060008
#@multitude
2
02009060001
#@multitude
3
02009060002
4
02009060003
5
02007060005
#@multitude
Note:
02009070002
02009070003
36
7
FUNCTION
1
SET
Enter the new date and time.
Ex: 1 2 Month
1 2 Date
1 9 9 8 Year
1 5 0 0 Time
If you make a mistake, use < or > to move the cursor to
the incorrect number and enter the new number over it.
SET
STOP
1. The clock of your machine is equipped with D.S.T (Daylight Saving Time) system. So, your clock will
automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April and set the time
back from 2:00 AM to 1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT TIME) to
"Invalid" (see page 61).
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this User's Guide.)
: December
: 12th
: 1998
: 3:00 PM
SET MODE (1–6)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
1–01–1998 00:00
DATE & TIME
12–12–1998 15:00