Setting The User Parameters For The Lan Interface - Panasonic DX-600 Service Manual

Setting the User Parameters for the LAN Interface

Depending on how your machine will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first.
No. Parameter
1 DATE & TIME
2 TIME ZONE
3 LOGO
4 CHARACTER ID
5 ID NO.
6 (MAC ADDRESS)
7* IP ADDRESS
8* SUBNET MASK
9* DEFAULT GATEWAY
IP ADDR
10* PRIMARY DNS
SERVER IP ADDRESS
11* SECONDARY DNS
SERVER IP ADDRESS
12* EMAIL ADDRESS
13* SMTP SERVER NAME The name of the SMTP Mail Server. (Up to 60 characters)
14 SMTP SERVER IP
ADDR
15* SMTP AUTH NAME
16* SMTP PASSWORD
17* POP SERVER NAME The name of the POP Mail Server. (Up to 60 characters).
18* POP SERVER IP
ADDR
19* POP USER NAME
20 POP PASSWORD
21 LDAP SERVER NAME The name of the LDAP Server. (Up to 60 characters)
22 LDAP LOG IN NAME
23 LDAP PASSWORD
24 LDAP SEARCH BASE ID for starting the search in the directory on the LDAP server. (Up to 60
25 HOST NAME
26 DEFAULT SUBJECT
27 DEFAULT DOMAIN
Edition 1.0
Current Date and Time.
The Time Zone is required as part of the Email header information when
sending Internet faxes.
Up to 25 characters & digits.
Up to 16 characters & digits.
Your Fax Telephone Number. (Up to 20 digits)
Hardware Address hard-coded into your machine. (If required, can be
obtained from the Fax Parameter List printout, by pressing [FUNCTION] [6]
[4] [SET])
IP Address assigned to your machine by the Network Administrator or the
DHCP Server.
Subnet Mask assigned by the Network Administrator or the DHCP Server.
Default Gateway IP Address assigned by the Network Administrator or the
DHCP Server.
IP Address of the primary DNS Server. If the DNS Server is not available,
change the setting of the Fax Parameter No. 161 (DNS SERVER) to
"Invalid", then enter the IP Address instead.
IP Address of the secondary DNS Server.
The Email Address assigned to your machine for sending and receiving.
(Up to 60 characters)
IP Address of the SMTP Mail Server.
User name required to login to the SMTP Server before it allow to send
email messages. (Up to 40 characters).
Password assigned to your machine. (Up to 10 characters)
IP Address of the POP Mail Server.
User Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
Login Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
Characters)
The Host Name assigned to your machine. (Up to 60 characters)
The default information to be added to the Subject Line for all outgoing
Email (up to 40 characters). To manually input this information before
transmission, change the Fax Parameter No. 159 (SUBJECT LINE
ENTRY) to "2:Valid".
When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50
characters)
292
Comments
DX-600/800
APR 2002