Panasonic DX-600 Service Manual page 316

No. Parameter
143 RELAY XMT
REPORT
144 EMAIL CHARACTER
SET
145 SENDER
SELECTION
146 POP TIMER
147 AUTO POP RCV
148 DELETE POP RCV
EMAIL
149 DELETE POP ERR
EMAIL
150 IFAX RETURN
RECEIPT
151 EMAIL HEADER
FORMAT
152 SUB-ADDRESS
ROUTING
153 TSI ROUTING
154 ROUTING HEADER
FORMAT
155 PRINT ROUTED
DOCUMENT
156 PRINT FORWARDED
DOCUMENT
Edition 1.0
Setting
Setting
Number
1 Off
*2 Always
3 Inc. Only
1 Japanese Selecting the Character Set when receiving or sending
*2 English
*1 Invalid
2 Valid
---- 0 to 60
min.
3
1 Invalid
*2 Valid
1 Invalid
*2 Valid
*1 Invalid
2 Valid
1 Invalid
*2 Valid
1 All
*2 Subject/
From/To
3 Off
*1 Invalid
2 Valid
*1 Invalid
2 Valid
*1 Originator Selecting the type of email header to be included in
2 Relay
Station
*1 Inc. Only Selecting whether a received fax to be routed is
2 Always
*1 Inc. Only Selecting whether a memory received fax or email to
2 Always
316
Setting how the COMM. Journal for relayed
transmission is sent to the originator.
Off : Don't send.
Always : Always send.
Inc. Only : Send only if communication has failed.
email text.
Selecting a pre-programmed sender's name and
email address before each transmission.
Setting the time interval for the machine to check for
email on the POP Server.
(0 = Does not check the POP Server for email.)
Selecting whether
downloads an email from the POP Server.
Selecting whether
automatically after retrieval from the POP Server.
Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
Selecting whether to send a return receipt when
receiving from another Panasonic Internet Fax.
Selecting the header information to print when an
email is received. (Normally used for Troubleshooting.
It shows the path of the email transmission before
arriving at your machine.)
Selecting whether to automatically route a received
fax or email using ITU-T Sub-address.
Selecting whether to route a received fax to a
telephone number
preprogrammed in Phone Book using the originating
fax's Numeric ID (TSI frame information).
the "From" field of each routed faxes.
Originator : The originating fax machine's TSI will
appear in the "From" field of the routed
email.
Relay Station: The routing station's email address will
appear in the "From" field of the routed
email.
always printed or only when the routing operation fails.
be forwarded is always printed or only when
forwarding is incomplete.
Comments
the machine automatically
the email will be
or an email
DX-600/800
deleted
address
APR 2002