Panasonic DX-600 Service Manual page 36

2.2.13. LANC PC Board (1037), MJR PC Board (1003), Power Supply Unit (1002)
(2)
(1)
(3)
(4)
(7)
(9)
(10) (8)
Edition 1.0
(1) Remove 2 Screws (19).
(2) Remove the LANC PC Board (1037) Assembly.
(3) Disconnect the LANB-LANC Harness (1038).
(3)
(4) Remove 2 Screws (C8).
(5) Remove the LANC PC Board (1037).
(5)
Caution:
Make sure the Power Cord (1108) is unplugged.
Note:
If removing only the Power Supply Unit, skip
steps (8), (9) and (10).
(6) Remove the Rear Cover (105) (Refer to 2.2.12.).
(7) Disconnect the Connectors (CN28 and 29) on
(8) Remove 2 Screws (19).
(9) Release the Latch Hook of Locking Card
(10) Remove the MJR PC Board (1003).
36
the MJR PC Board.
Spacer (405).
DX-600/800
APR 2002