Panasonic DX-600 Service Manual page 312

Fax Parameter Table
No. Parameter
01 CONTRAST
02 RESOLUTION
04 STAMP
05 MEMORY
06 DIALING METHOD
07 HEADER PRINT
08 HEADER FORMAT
09 RCV'D TIME PRINT
10 KEY/BUZZER
VOLUME
12 COMM. JOURNAL
13 AUTO JOURNAL
PRINT
Edition 1.0
Setting
Setting
Number
*1 Normal
2 Lighter
3 Darker
1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3 S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
*1 Off
2 On
1 Off
*2 On
1 Pulse
*2 Tone
*1 Inside
2 Outside
3 No Print
*1 Logo, ID
No.
2 From To
*1 Invalid
2 Valid
1 Off
*2 Soft
3 Loud
1 Off
2 Always
*3 Inc. Only
1 Invalid
*2 Valid
312
Setting the home position of the CONTRAST key.
Setting the home position of the STAMP key.
To select the stamp function when document is stored
in memory, see Fax Parameter No. 28.
Setting the home position for memory transmission/
copy mode. (This setting can be temporarily changed
by using F8-9 (MEMORY XMT))
Selecting the dialing method.
Selecting the printing position of the header.
Inside
: Inside TX copy area.
Outside
: Outside TX copy area.
No Print
: Header is not printed.
Selecting the header format.
Selecting whether the machine prints the received
date & time, remote ID, percentage of reduction and
page number on the bottom of each received page.
Selecting the volume of the Key/Buzzer tone.
Selecting the home position of printout mode for
COMM. Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. Only: Prints only when communication has failed.
Selecting whether the machine prints the journal
automatically after every 32 transactions.
Comments
DX-600/800
APR 2002