Panasonic DX-600 Service Manual page 317

No. Parameter
157 TRANSACTION
JOURNAL
158 PC REMOTE
UPDATE
159 SUBJECT LINE
ENTRY
160 DEFAULT DOMAIN
161 DNS SERVER
162 TIFF VIEWER URL
163 ROUTING HEADER
164 IFAX XMT HEADER
(Email only)
169 DHCP CLIENT
170 SMTP
AUTHENTICATION
(See Note 3)
171 POP BEFORE SMTP
(See Note 3)
Edition 1.0
Setting
Setting
Number
*1 Invalid
2 Valid
*1 Invalid
2 Valid
*1 Invalid
2 Valid
1 Invalid
*2 Valid
1 Invalid
*2 Valid
1 None
*2 English
3 English+
Japanese
*1 Invalid
2 Valid
*1 Included Selecting whether to include the header when sending
2 Not
Included
1 Invalid
*2 Valid
*1 Invalid
2 Valid
*1 Invalid
2 Valid
317
Selecting whether the machine sends a transaction
journal to the pre-programmed email address.
Selecting whether the machine will accept commands
from an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
Selecting whether
programmed during each transmission.
Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number
Dialing.
Selecting whether to use the DNS Server for the
Internet communication.
Selecting whether to include the URL address in the
email message body.
Selecting whether to add the Header Print information
of the Routing Station on the top edge of each routed
pages.
a document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents
back to your PC)
Note: When sending to a Domain other than as
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
Select whether the machine would automatically
acquire the Network Parameters from the DHCP
Server. (Such as IP Address, Subnet Mask, Default
Gateway IP Address, etc.)
Note:If you change the setting of this parameter, the
machine will reboot automaticaly.
Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication with a user name and
password before accepting email. After change the
setting to "Valid", you can enter the user name and
password assigned to your machine by your network
administrator.
Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication by first retrieving
incoming email from the POP Server before accepting
email. (Please consult
administrator).
Comments
the "Subject" line
with your
DX-600/800
can be
network
APR 2002