Operation - Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual

OPERATION

This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed
of FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected,
PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
Item
FR SUPER
No. DISP.
0000
100 SEARCH ENA
0001
0000
0001
0002
101 SHTL MAX
0003
0004
0000
0001
0002
0003
102 FF.REW MAX
0000
0001
103 SEEK SEL
0000
104 REF ALARM
0001
0000
108 PLAY DELAY
0015
0000
0001
122 STOP EE SEL
Setting
FR SUPER
No. DISP.
DIAL Specifies method for transferring to the search mode (search dial operation).
0: Press the STILL button or turn the search dial to engage search dial operation.
KEY
1: Press the STILL button to engage search dial operation.
×8 Sets the maximum shuttle speed operation.
16 0: 8× normal speed
×
1: 16× normal speed
×32
2: 32× normal speed
×60
3: 60× normal speed
×100
4: 100× normal speed
32 Sets the maximum speed of FF and REW operation.
×
0: 32× normal speed
×60
1: 60× normal speed
×100
2: 100× normal speed
SEEK
3: Seek operation to start of clip
NOTE:
• When SEEK is selected, FF and REW operations for FF and REW commands
transferred via 9P and 1394 are performed at 100× normal speed.
• The seek operation is available in playback mode.
CLIP Specifies where a NEXT (SHIFT+FF) and PREV (SHIFT+REW) seek operation moves to.
0: The start of the clip
CLIP&T
1: The start of the clip or video text memo
NOTE:
This setting is not available during FF and REW operation.
OFF Selects whether or not a warning should appear when REF.VIDEO is not connected.
0: Displays no warning
ON
1: Flashes the STOP lamp to warn
0
Sets PLAY delay time in frame increments.
| |
15
EE Specifies whether to invoke the EE mode or playback mode when STOP is pressed.
0: EE mode
PB
1: Playback mode
NOTE:
During IEEE1394 signal input, the EE mode is invoked regardless of this menu setting.
* An underlined setting indicates an initial value.
Settings and brief function description
125
Setup: Item Settings