Time Code - Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual

TIME CODE

This menu sets the time code.
Item
FR SUPER
No. DISP.
500 VITC BLANK
501 VITC POS-1
502 VITC POS-2
504 RUN MODE
505 TCG REGEN
128
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 BLANK
59.94Hz
0001 THRU
Specifies whether or not a VITC signal will be output at the positions selected in menu No.
501 VITC POS-1 and No. 502 VITC POS-2 during playback.
0: VITC signals are not output.
1: VITC signals are output.
NOTE:
• This setting is available only during analog composite output and SD SDI output.
• In EE mode, the input signal is output with the VITC signal.
When set to 59.94 Hz,
59.94Hz
29.97 Hz
Specifies the position where the VITC signal will be inserted.
0000 10L
NOTE:
| |
• You cannot select the same line as in menu No. 502 VITC POS-2.
0006 16L
• This setting is available only during analog composite output and SD SDI output.
| |
0010 20L
When set to 50 Hz,
25 Hz
0000 7L
| |
0004 11L
| |
0015 22L
When set to 59.94 Hz,
59.94Hz
29.97 Hz
Specifies the position where the VITC signal will be inserted.
0000 10L
NOTE:
| |
• You cannot select the same line as in menu No. 501 VITC POS-1.
0008 18L
• This setting is available only during analog composite output and SD SDI output.
| |
0010 20L
When set to 50 Hz,
25 Hz
0000 7L
| |
0006 13L
| |
0015 22L
0000 REC
Specifies an operating mode that advances the internal time code generator.
0: The internal time code generator is advanced only during recording.
0001 FREE
1: When the power is on, the internal time code generator is advanced regardless of
operating mode.
NOTE:
• When menu No. 040 VFR REC is set to ON, the time code advances only during
recording even when FREE is selected.
0000 TC&UB Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN
mode.
0001 TC
0: Regenerates both the time code and the user bit
0002 UB
1: Regenerates only the time code
2: Regenerates only the user bit
* An underlined setting indicates an initial value.
Settings and brief function description
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
only
only
only