Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual page 131

Item
FR SUPER FR
No. DISP. No.
0000
0001
0002
DOWNCON
620
MODE
0000
0001
0002
621 UPCONV MODE
0000
0001
626 D/C ENH H
0000
0001
627 D/C ENH V
When set to 59.94 Hz,
0000
0001
0002
0003
643 OUT MODE SEL
When set to 50 Hz,
25 Hz, 60-25 Hz
0000
0001
0002
0003
0001
0002
645 WIDE SELECT
0000
650 STYLE 0001
Setting
SUPER
DISP.
FIT_V
59.94Hz
FIT_H
60-25Hz
FIT_HV
Specifies the aspect ratio during down conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
FIT_V
59.94Hz
FIT_H
60-25Hz
FIT_HV
Specifies the aspect ratio during up conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
0dB
59.94Hz
+1dB
Specifies whether or not horizontal outlines be emphasized in down-conversion.
0: 0dB
1: +1dB
0dB
59.94Hz
+1dB
Specifies whether or not vertical outlines be emphasized in down-conversion.
0: 0dB
1: +1dB
59.94Hz
29.97 Hz
Specifies the video signal output from the video output connector.
AUTO
0: Switches output automatically depending on current recording and playback format.
1080i
1: 1080/59.94i or 1080/50i
720p
2: 720/59.94p or 720/50p
480i
3: 480/59.94i or 576/50i
NOTE:
When something other than AUTO is selected, a signal that differs from the recording
and playback format is automatically converted before output.
AUTO
1080i
720p
576i
WIDE
59.94Hz
NORMAL
Specifies whether or not WIDE data be recorded when 480i or 576i is selected in menu
No. 020 SYS FORMAT.
1: Recorded
2: Not recorded
NOTE:
When 1394 is selected as the input signal, input data is recorded in its original form.
CMPNT Sets the level adjustment mode.
CMPST 0: Level adjustment mode for the component style
1: Level adjustment mode for the composite style
Settings and brief function description
50Hz 23.98Hz 29.97Hz
only
50Hz 23.98Hz 29.97Hz
only
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz only
59-23Hz 25Hz
59-23Hz 25Hz
only
60-25Hz
60-25Hz only
60-25Hz only
Setup: Item Settings
131