D-Link DSN-6020 User Manual page 77

(Figure 4.5.2.2: With Smart-UPS.)
UPS column description:
•
UPS Type
Shutdown
Battery
Level (%)
Shutdown
Delay (s)
Shutdown
UPS
Status
Figure 4.5.2.2
Select UPS Type. Choose Smart-UPS for APC, None for other
vendors or no UPS.
When below the setting level, system will shutdown. Setting
level to "0" will disable UPS.
If power failure occurs, and system power can not recover, the
system will shutdown. Setting delay to "0" will disable the
function.
Select ON, when power is gone, UPS will shutdown by itself after
the system shutdown successfully. After power comes back, UPS
will start working and notify system to boot up. OFF will not.
The status of UPS:
"Detecting..."

"Running"

"Unable to detect UPS"

"Communication lost"

"UPS reboot in progress"

"UPS shutdown in progress"

"Batteries failed. Please change them NOW!"

77