Hitachi StarBoard FX-DUO-63 User Manual page 22

StarBoard FX-DUO Series
[3] Adjust the height
CAUTION
Be sure to use two or more people for this work.
Failure to comply may cause the board to fall, resulting in personal injury, or may cause
damage to this product due to shock of impact.
The StarBoard can be positioned at six height levels. Adjust the height according to the
following procedure. Note that this work should be performed by two or more people.
(b)
(a) Remove the triangular knob screw at the
bottom of each side.
(b) Raise the board and attach the receiving
brackets to the square holes at the desired
height.
(c) Tighten the triangular knob screw at the
(a)(c)
bottom of each side.
1-10
Introduction
English