How To Use The Electronic Pen; Inserting The Battery - Hitachi StarBoard FX-DUO-63 User Manual

StarBoard FX-DUO Series

2.2 How to Use the Electronic Pen

This section gives a basic description of how to use the electronic pen (option).

2.2.1 Inserting the Battery

Perform the preparations for using the electronic pen.
CAUTION
Be sure to install batteries correctly.
Do not install batteries with positive and negative terminals reversed, or use batteries other
than the type specified. It will cause pen malfunctions and excess heat, or burns to the
hand.
Be sure to provide insulation during disposal.
Be sure to insulate the positive and negative terminals of the battery using cellophane tape,
or similar material when disposing of batteries. Disposing of batteries without insulating
them may lead to overheating, bursting, or ignition due to shorting, resulting in personal
injury or fire. Furthermore, be sure to follow all local rules and regulations regarding
proper battery disposal.
[1] Insert the battery into the electronic pen.
(1) Open the battery cover by moving it
in the direction of the arrow.
(2) As shown in the figure, insert the
AAA alkaline battery so that the +
side faces the outside.
(3) Close the battery cover by moving it
in the direction of the arrow.
2-4
How to Use
English