Connecting A Personal Computer; Connect The Lcd Monitor To A Personal Computer - NEC LCD5710-2-IT - MultiSync - 57" LCD Flat Panel Display User Manual

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards and pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480 31.5kHz
800 x 600 37.9kHz
1024 x 768 48.4kHz
1280 x 768 48kHz
1360 x 768 48kHz
1280 x 1024 64kHz
1600 x 1200 75kHz
1920 x 1080 67.5kHz

Connect the LCD Monitor to a Personal Computer

• To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB 3 connector (BNC) on the LCD monitor, use a mini D-sub 15 pin to BNC x 5 signal cable (not
included). Select RGB 3 from the INPUT button.
• When connecting one or more LCD monitors, use the RGB OUT connector (BNC).
• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.
LCD monitor
BNC x 5
BNC x 5
Denotes an AV unit function.
All AV functions are enabled when the AV unit is installed.
If this product was purchased in Europe the AV unit is preinstalled and all
AV functions are available.
Remarks
Vertical
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz Compressed image
60Hz Recommended resolution
Mini D-sub 15 pin
English-13
To audio output
To analog RGB output
PC or IBM compatible
To RGB 3 IN
BNC x 5
LCD monitor (second monitor)