Parts Name And Functions; Control Panel - NEC LCD5710-2-IT - MultiSync - 57" LCD Flat Panel Display User Manual

Parts Name and Functions

Control Panel

OFF
1
POWER button ( )
Switches the power on/off. See page 18.
2
MUTE button
Switches the audio mute ON/OFF.
3
INPUT button
Acts as SET button within OSM menu. (Toggle switches
between [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] or
[VIDEO<S>]).
[DVD/HD] and [VIDEO] inputs are enabled when the AV-
unit option is installed.
[VIDEO<S>] is enabled by selecting the "SEPARATE"
mode in the OSM or by having the "S-VIDEO" cable
connected with the "S-VIDEO" signal present and
selecting "PRIORITY" MODE. See page 26.
4
PLUS (+) button
Acts as (+) button to increase the adjustment with OSM menu.
Increases the audio output level when the OSM menu is
turned off.
5
MINUS (-) button
Acts as (-) button to decrease the adjustment with OSM menu.
Decreases the audio output level when the OSM menu is
turned off.
6
UP ( ) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area up to select
the adjustment with OSM menu.
10
EXIT
ON
8
EXIT INPUT MUTE
5
7 6 4
7
DOWN ( ) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area down to
select the adjustment with OSM menu.
8
EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu with OSM menu.
9
Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See page 8.
Glows green when the LCD monitor is in active mode and
glows red when the LCD monitor is in POWER OFF mode.
When the LCD monitor is in POWER SAVE mode, it will
glow both green and red. When SCHEDULE is enabled, it
will blink green and glow red. See page 19.
In the case of where a failure is detected, it will blink red.
Main Power Switch
10
On/off Switch to turn main power on/off.
Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
and and hold down simultaneously for more than
3 seconds. To resume back to user mode, press both of
and and hold simultaneously for more than 3 seconds.
Denotes an AV unit function.
All AV functions are enabled when the AV unit is installed.
If this product was purchased in Europe the AV unit is preinstalled and all AV
functions are available.
English-5
9
Button Location
INPUT MUTE
3 2 1