Power On Delay; For Long Life Use Of Public Display - NEC LCD5710-2-IT - MultiSync - 57" LCD Flat Panel Display User Manual

HEAT STATUS

POWER ON DELAY

DATE & TIME
SCHEDULE
ADVANCED
OPTION RESET
NOTE 1: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a
residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not
permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver
at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set "SCREEN SAVER", "DATE &TIME" and "SCHEDULE" functions to further reduce the risk of Image persistence.

For long life use of Public Display

< Image Sticking of LCD Panel >
When LCD panel is operated continuously for long hours, a trace amount of electric charge remains near the electrode inside LCD, and a
residual or "ghost" image of previous image may be observed. This is called Image Persistence and is not permanent.
When a fixed image is displayed for a long period, ionic impurities inside the LCD accumulate along the displayed image. This is called
"Image Sticking" and is permanent.
< Recommendations >
For preventing the fast transition to Image Sticking, and for longer life usage of LCD, the following are recommended:
1. Fixed image should not be displayed for long period. Fixed images should be cycled in short intervals.
2. When not in use, do one of the following: turn off the monitor, use the Power Management Function to enter power save mode, or use
Schedule Function to turn off the monitor.
ADVANCED OPTION HEAT STATUS
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
POWER ON DELAY
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT :RETURN MENU :EXIT MENU
EXIT
DATE & TIME
ADVANCED OPTION
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
ADVANCED OPTION RESET
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
Provides information on the status of the COOLING FAN,
BRIGHTNESS and TEMPERATURE.
COOLING FAN runs when internal temperature of the
STATUS
COOLING FAN1 ON
monitor is over a specified limit.
COOLING FAN2 ON
BRIGHTNESS NORMAL
TEMPERATURE BRIGHTNESS is decreased when internal temperature
SENSOR 1 0.0 C / 32.0 F
SENSOR 1 0.0 C / 32.0 F
of the monitor is over specified limit while the cooling fan
:RETURN :EXIT MENU
EXIT MENU
is in use. In this case, a warning is displayed on the
screen.
Adjusts the delay time between "standby" to "power on"
mode.
3 SEC.
"POWER ON DELAY" time is selectable between
+ -: ADJ :RETURN :EXIT MENU
EXIT MENU
0 and 50 sec.
YEAR 2004
MONTH JANUARY Adjusts the current date and time for internal clock.
DAY 01
TIME
You should set this function when you use "SCHEDULE".
00 : 00
DAYLIGHT SAVING YES / NO
CURRENT DATE TIME
JAN. 01. 2004 00 : 00 : 00
+ -: ADJ SET :SET EXIT :RETURN MENU :EXIT MENU
EXIT
Selecting ADVANCED OPTION reset allows you to reset
all OSM settings from ADVANCED OPTION settings,
except for DATE & TIME, and SCHEDULE.
NO
Select "YES" and press "SET" button to restore the
YES
factory preset data.
:SEL :RETURN :EXIT MENU
EXIT MENU
Press "EXIT" button to cancel and then return the
previous menu.
English-28
Programs the monitor's working
schedule.
Schedules the power on and
power off with hour and day of
the week. Also sets the input port.
Select "EXIT" to set schedule.
(see "NOTE 3" on page 29 for
further information).