Restarting The Xstack Storage (Control Tab); Shutting Down The Xstack Storage (Control Tab) - D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual

The Open dialog box appears (see Figure 6-10).
4. Using the Open dialog box, navigate to the location where you downloaded the software
file. Then click the file and click the Open button.
The precautionary message in Figure 6-14 appears.
5. Click OK to upgrade the software and reboot the xStack Storage, or click Cancel to keep
the current configuration and not reboot the xStack Storage. If you click OK, a progress
bar shows the progress of the upload. IMPORTANT: Do not close the xStack Storage
Management Center until after the upload has successfully completed.

6.2.9 Restarting the xStack Storage (Control Tab)

The Control tab provides a Restart button for rebooting the xStack Storage.
To reboot the xStack Storage:
1. In the System Administration View, click the Control tab.
2. Click the Restart button.
The precautionary message in Figure 6-15 appears.
3. Click OK to reboot the xStack Storage or click Cancel to not reboot the xStack Storage.

6.2.10 Shutting Down the xStack Storage (Control Tab)

The Control tab provides a Shutdown button for shutting down the xStack Storage.
To shut down the xStack Storage:
1. In the System Administration View, click the Control tab.
xStack Storage Management Center Software User's Guide
Figure 6-14. Precautionary Message
You can click the Use Alternate Version button to revert to the previous
version of software (if any).
Figure 6-15. Precautionary Message
93