Pinging From A Network Portal - D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual

3. Click OK to delete the portal or click Cancel to keep it.

7.4.3 Pinging from a Network Portal

If you encounter or suspect a problem with a network portal, you can originate an outgoing
ping from the network portal to a destination device.
To ping from the network portal:
1. In the Network Settings View, click a network portal in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Ping from Portal.
–
In the Network Actions panel, click Ping from Portal.
–
Press the right mouse button and click Ping from Portal from the shortcut menu.
–
Any of these steps displays the Ping from Portal dialog box (see Figure 7-7).
3. In the Ping to field, type the IP address of the destination device you want to ping.
4. Click OK.
The results of the ping appear in the Ping Results field.
5. If the ping is successful, click the Close button. If the ping fails, verify that the network
portal's IP address is not active elsewhere on the network.
xStack Storage Management Center Software User's Guide
Figure 7-6. Precautionary Message when Deleting a Portal
Figure 7-7. Ping from Portal Dialog Box
111