Controller Details (Controller Tab) - D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual

6.2.3 Controller Details (Controller Tab)

The Controller tab in the System Administration View displays status information about the
controller (see Figure 6-7). If your xStack Storage system is equipped with dual controllers,
the Controller tab label appears as either "Controller 0" or "Controller 1", depending on
which controller you selected in the Main View.
the Controller tab.
Item
Status
State
Health
Battery State
Controller Type
Controller Slot Id
Date/Time
Persistence Data State
Drive Slot Count
Ethernet Data Port Count
Buffer Memory Dimm Count
Buffer Memory Size
System Memory Dimm Count
System Memory Size
NAND Memory Size
Serial Number
Software Current Version
Alternate Software Version
Mfg Board Revision
Mfg Product Id
xStack Storage Management Center Software User's Guide
Table 6-1. Controller Tab Information
OK or Failed
Single-controller systems appear as "Standalone", while dual-controller systems appear as
"Bound", "Survivor" or "Unable to Bind".
Healthy or Unhealthy
OK or Failed
ATX-based systems (DSN-1000/2000/3000 series) or SFF (for DSN-5000 Series systems)
Single-controller systems will always show Slot 0, while dual-controller systems will show Slot
0 or 1 depending on which controller was selected in the Main View
The current system date and time
Only used for diagnostic purposes; this item should normally appear as: "Unchanged "
The number of drive slots that are defined for the controller
The number of iSCSI data ports that are available on the controller
The number of memory modules that are installed for Buffer Memory
The amount of Buffer Memory that is detected
The number of memory modules that are installed for System Memory
The amount of System Memory that is detected
The amount of NAND Memory that is detected
The serial number of the controller
The version of the software that is running on the controller
The alternate version of software that is stored in the inactive partition
The manufacturing revision of the controller assembly
The manufacturing product number
Table 6-1 lists the information appears on
Description
87