D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual page 76

Settings (can be modified)
First Burst Length
Default Time To Wait
Maximum R2T Outstanding
Maximum Connections
Primary Header Digest Method
Secondary Header Digest Method
Primary Data Digest Method
66 Chapter 4 Managing Volumes
Figure 4-35. Advanced Volume Settings
Table 4-2. Advanced Volume Settings
Maximum amount, in bytes, of unsolicited data that an initiator can send to a
target during the execution of a single SCSI command. This amount includes the
immediate data, if any, and the sequence of unsolicited Data-Out PDUs, if any,
that follow the command. The allowable selections include 8192, 16384 and
32768. The default selection is 8192 bytes.
Maximum time to wait, in seconds, for a login PDU to be received from the target
in response to a login request sent by the initiator before failing the connection
attempt. The allowable range is 0 to 3600 seconds. The default is 2 seconds.
Maximum number of outstanding ready-to-send (R2T) requests that are allowed
for each task within this session. The allowable range is 1 to 8. The default is 8.
Maximum number of connections that will be allowed within this session. The
allowable range is 1 to 8. The default is 8.
Primary header digest used by the volume. Choices are:
No Digest (default)

CRC32C

Secondary header digest used by the volume. Choices are:
No Digest

CRC32C (default)

Primary data digest used by the volume. Choices are:
No Digest (default)

CRC32C

Description