Dell Latitude D600 Service Manual page 31

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
Back to Contents Page
Display Assembly and Display Latch
Dell™ Latitude™ D600 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: You must remove the display assembly before you remove the palm
rest.
1. Follow the instructions in
2. Remove the keyboard.
3. Open the display assembly approximately 180 degrees, and support the display
assembly so that it does not open past this position.
4. Loosen the captive screw that secures the display cable to the system board, and
release the cable from the four cable-routing clips.
file:///F|/Service%20Manuals/Dell/Latitude/d600/display.htm (1 of 10) [2/28/2004 8:15:47 AM]
"Preparing to Work Inside the Computer."