Dell Latitude D600 Service Manual page 36

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
3 display bezel
4 display panel
Display Bezel
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located
on the front of the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the
bezel.
6. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers
to separate the bezel from the top cover by lifting the inside edge of the bezel
away from the top cover.
Display Panel
file:///F|/Service%20Manuals/Dell/Latitude/d600/display.htm (6 of 10) [2/28/2004 8:15:47 AM]
6M873
See MINI RSL
"Preparing to Work Inside the
display assembly.
7 flex cable
8 M2 x 5-mm screws (4)
Computer."
6M871