Dell Latitude D600 Service Manual page 33

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
1 display
2 cable-routing clips (4)
3 display cable connector
5. Pull up on the pull-tab that is attached to the display cable connector to remove
the connector from the system board.
6. Remove the three M2.5 x 6-mm screws.
7. Rotate the display assembly to a 90-degree angle, and lift the display assembly
up and out of the computer base.
file:///F|/Service%20Manuals/Dell/Latitude/d600/display.htm (3 of 10) [2/28/2004 8:15:47 AM]