Asus ESC4000 G2 User Manual page 126

The ARRAY SELECTION MENU displays the available drives connected to
2.
the SATA ports. Use the up/down arrow keys to select the drives you want to
include in the RAID set, and then press <Space>. When selected, the drive
indicator changes from READY to ONLIN A[X]-[Y], where X is the array
number, and Y is the drive number.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
•
•
•
3. Select all the drives required for the RAID set, and then press <F10> to
configure array setting.
4. Press <Space> to select the configurable array.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
6-6
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
0
1
2
3
74.74GB HDS728080PLA380
The information of the selected hard disk drive displays at the bottom of the
screen.
You need at least two identical hard disk drives when creating a RAID 1 set.
You need at least four identical hard disk drives when creating a RAID 10
set.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
A-0
0
SPAN-1
1
A.10.09231523R
PORT #
ONLIN A00-00
ONLIN A00-01
READY
READY
A.10.09231523R
PORT #
DNLIN A00-00
DNLIN A00-01
05.01C05
Chapter 6: RAID configuration